20 Watt, SLV20 DC-DC Single Output Series

1.00"x 2.0"x .400" OPEN FRAME CONSTRUCTION

FEATURES

• Wide Input Range 2:1
• Pick and Place Packaging
• High Efficiency to 90% @ 5V
• External Trim
• -40C to +100C Operation
• 1500Vdc Isolation
• Open Frame Construction
• Surface Mount and Thru-Hole Types
• Remote On/Off
• Under-Voltage Lockout
• Overvoltage and Short Circuit Protection
• Synchronous Rectification

The SLV20 series of DC-DC converters have been designed as a surface-mount and thru-hole solution for a wide range of applications where low voltage, high efficiency and ease of assembly are needed. The SLV20 series packs up to 20 watts of power in 1.00" x 2.0" x .400" open frame construction and operating temperatures of -40C to +105C. All models are designed to meet UL1950, CSA950 and EN 60950.

MODEL SELECTION GUIDE

20 WATT SLV20 DC-DC SERIES

Model Number********	Input Voltage		Lin@Vin NOM		Output V1,V2,V3	Output Current/FL	PO/W	Output OVP	Typical Eff.
	Nom	Range***	FL	NL
SLV20-12S1V8**	12Vdc	9-18Vdc	0.823	10mA	1.8	4.4	8	3.6	81
SLV20-12S2V5**	12Vdc	9-18Vdc	0.992	10mA	2.5	4	10	3.6	84
SLV20-12S3V3**	12Vdc	9-18Vdc	1.163	10mA	3.30	3.6	12	3.9	86
SLV20-12S05**	12Vdc	9-18Vdc	1.498	10mA	5.00	3.2	16	6.8	89
SLV20-24S1V8**	24Vdc	18-36Vdc	0.412	10mA	1.80	4	8	3.6	81
SLV20-24S2V5**	24Vdc	18-36Vdc	0.595	10mA	2.50	4	12	3.6	84
SLV20-24S3V3**	24Vdc	18-36Vdc	0.727	10mA	3.30	4	15	3.9	86
SLV20-24S05**	24Vdc	18-36Vdc	0.936	10mA	5.00	4	20	6.8	89
SLV20-48S1V8**	48Vdc	36-75	0.203	10mA	1.80	5.5	8	3.6	82
SLV20-48S2V5**	48Vdc	36-75	0.294	10mA	2.50	4.8	12	3.6	85
SLV20-48S3V3**	48Vdc	36-75	0.287	10mA	3.30	4.5	15	3.9	87
SLV20-48S05**	48Vdc	36-75	0.463	10mA	5.00	4	20	6.8	90

Note:** Insert suffix: SM for Surface Mounting or TH for Thru-hole type Mounting.
MODIFICATIONS AND CUSTOMS AVAILABLE. CALL FACTORY:508-580-8515

INPUT
Input Voltage Range	2:1
Note/3	9-18Vdc/12V models, 18-36Vdc/24V models, 36-75Vdc/48V models
Input Filter	Pi Type
Under Voltage Lockout	8.5V/12V models, 16.5V/24V models, 32V/48V models
Remote On:	+5V or open, Ref.(-)Vin
Remote Off:	+0.7V Ref (-)Vin
Conducted Noise	EN55022, level A/Note 5

OUTPUT
Output Power	20W continuous Max
Output Voltage/current	See Model table
Output Setting Accuracy, Singles	+-1% Typ. +/-1.5% max.
Load Variation Singles/FL-10%L	+/-0.5% Note 4
Line Regulation	+/-2%
Total Error Band, Singles	+/-3%, Line/Load and Temp.
Ripple and Noise, 20MhZ BW	75mV
Transient Response/FL-1/2L	2% deviation, 200uS
Temperature Coefficient	+/-.01%c
Short Circuit Protection	Indefinite, Modulated, Automatic Recovery

GENERAL
Efficiency	See Model Table
Isolation Voltage	1500Vdc/1Min
Isolation Resistance	100M
Switching Frequency	400Khz
MBTF	1.0M hrs.MIL-HDBK-217F Ground Benign@25C

ENVIRONMENTAL
Operating Temperature Range	-40C to +105C
Operating Temperature Range	-40C to +55C@FL
Storage Temperature Range	-55C to +125C
Maximum Junction Temperature	125C
Humidity	5% to 95% RH, Non-condensing
Cooling	Natural Convection
Processing:Note 2	230C peak, 20 sec.

MECHANICAL
Size	1.75"x 2.00"x 0.500"
Mounting	SMD and Thru-hole types.
Case/Material	Open-frame, 94V-0 FR-4 P.C.B.

PIN CONNECTIONS
Pin Number	Function
1	-Vin
2	-Vin
3	-Vin
4	N/C
5	-sense
6	_Vo
7	+Vo
8	+sense
9	Trim
10	On/Off
11	-Vin
12	+Vin

NOTES:

1. Output Power is up to 20W, see Io rating on "Model Selection Guide".
2. Model numbers are SMD type pin configuration, replace suffix SM with TH for Thru-hle type.
3. Typical start-up for 12Vin models is 9V. Maximum startup is 9.5V.
4. Operation is allowed to No-Load however operation below 10% load may cause ripple and noise to exceed spec.

PO BOX 668, South Easton, MA 02375
Email:sales@internationalcoil.com